UNLOADING AND ASSEMBLY
Form # 169078
Model Year - 2009
17
h. Install pin (A) through boot (C) and foot on both
sides and secure with hairpin.
IMPORTANT
Ensure pin (A) is fully inserted and hairpin
is installed behind bracket.
i. Reposition stand (E) to storage position by
pulling pin (F), inverting stand and locating on
bracket. Reinsert pin (E) and secure with
hairpin.
j. Remove pin from storage position (G) in linkage
and insert in hole (H) to engage float springs.
Secure with hairpin.
k. Disengage lift cylinder stops.
l. Start engine and lower header fully.
m. Activate header tilt cylinder switches on ground
speed control in tractor to position header angle
at the middle of adjustment range.
n. Stop engine and remove key.
F
E
H
G
A
C
HEADER UP
HEADER TILT UP
HEADER DOWN
HEADER
TILT DOWN
