UNLOADING AND ASSEMBLY
Form # 169078
Model Year - 2009
12
STEP 7. REPOSITION WOBBLE
BOX BREATHER
a. Move breather (B) to back port and install plug
(A) in forward port at wobble box(es).
b. Check oil level.
STEP 8. INSTALL TALL CROP
DIVIDER
If kit not supplied, proceed to STEP 9. ADJUST
LEAN BAR, otherwise proceed as follows:
a. Remove hardware on both sides of lean bare
and remove lean bar.
b. Attach extensions (C) to lean bar with four bolts
(D) and nuts provided.
c. Re-attach lean bar to header with existing
hardware at desired location. Tighten bolts.
d. Attach LH divider assembly (E) to LH end of
lean bar with two bolts (F) and nuts provided.
The divider may be positioned as shown or
using the optional mounting hole (G).
e. Install U-bolt (H) and tighten all bolts.
f. Repeat for RH divider.
BETWEEN LOWER HOLE
AND END OF DIPSTICK
CHECK OIL LEVEL WITH TOP OF WOBBLE BOX
HORIZONTAL
A
B
C
D
H
E
F
G
