Once you have finished with the tourney lock, replace the wrap around grip and
screws before playing.
Programming the Droid Software
To program the board, turn the gun off. Hold down the trigger whilst turning the
gun on. The indicator light will turn white, continue to hold the trigger until it goes
blue (debounce register). Press the trigger once to advance to the next setting
as given below. When you have a setting you would like to change, hold the trig
-
ger until the indicator light goes out. Release the trigger, and the indicator light
will flash to show the current setting. Then when it goes out, input the new setting by the trigger and wait
for the indicator light to go solid again.
Register Summary Table
LED Colour
Setting
Default
Blue
Debounce (1/2ms increments)
10
Red
Dwell (1ms increments)
12
White
Fire mode
1 (semi)
Green
Max ROF - only used in capped and ramp
modes
5 (15bps)
Yellow
Loader delay (1/2ms increments)
2
Teal
Anti Mechanical Bounce
2
Purple
Anti Bolt Stick
3
Flickering Blue
Ramp Start (used on ramping fire modes)
5bps
Flickering Red
Cycle filter
2
12
Contents
Know your Droid
Quick Setup
Using your Droid
Advanced Setup
Maintenance
Parts List
Troubleshooting
