usual operating dwell of your marker. To adjust this dwell, use the last register
(Test mode dwell).
Setting the Bolt Tracking Delay
The bolt tracking delay is a parameter used to ensure that bolt tracking is work
-
ing correctly. Do not adjust this unless you are advised by a MacDev tech.
Setting the Test Mode Dwell
The test mode dwell is used to adjust the dwell used when the user selects the
test mode with adjustable dwell in the eye mode register (Described above).
The user may adjust this setting from 1-30ms.
Resetting the Software
If required, the software may be reset to the
factory defaults. This is useful if the user has
made changes to the software settings that
result in malfunctions, the software may be
quickly and easily reset to default.
Before attempting to reset the board, you
must have the wrap around grip open on the
left hand side and be able to enter program-
ming mode. If your board has the tourney lock
enabled, you will have to disable it before
continuing. For instructions on this see the
beginning of the Advanced Setup section.
To reset the board, first enter programming
16
Contents
Know your Droid
Quick Setup
Using your Droid
Advanced Setup
Maintenance
Parts List
Troubleshooting
