19
MAC 6000 Hydronic Heater
2106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
Pre-Start Checklist
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 23
PRE-START CHECKLIST
WARNING!
SEVERE INJURY MAY RESULT IF PRECAUTIONS ARE NOT FOLLOWED.
DO NOT COVER THE MACHINE. MACHINE MUST BE USED IN AN OPEN
AREA.
DO NOT OPERATE MACHINE WITH ACCESS DOORS OPEN.
MACHINE MUST BE COMPLETELY SHUT DOWN BEFORE OPENING
ACCESS DOORS.
MAKE SURE ENGINE IS SHUT OFF BEFORE CHECKING FLUID LEVELS.
MACHINE MUST BE RUN ON LEVEL GROUND TO INSURE PROPER
OPERATION.
MACHINE MUST BE SECURED ON LEVEL GROUND TO PREVENT
ROLLING OR SHIFTING AS SERIOUS INJURY MAY OCCUR.
WARNING!
Do not use any fuel other than diesel #1 or diesel #2
Do not use gasoline or ANY fuel contaminated with gasoline!
PRE-START CHECKLIST
Check area surrounding heater for flammable materials or fire hazards.
Check exterior of heater for any fluid leaks. (Fuel, engine oil, engine antifreeze,
glycol hose leaks)
Check general condition of heater.
Check air intake screens for any obstructions and are in proper condition.
Check exhaust stacks for any obstruction. (snow, ice, etc..)
Insure ground hose is securely fastened to outlet assembly.
Check to see that unit has been serviced and ready for operation.
Check fuel tank for proper fuel and fuel level. Only diesel fuel #1 or #2
*ATTN: MAKE SURE DIESEL HAS NO ADDITIVES*
Check that the unit is level and properly secure before starting.
Hook up ground hoses in desired configuration.
ENGINE COMPARTMENT CHECKLIST
Check interior compartment for fluid leaks. (Fuel-engine/burner, engine oil,
engine antifreeze, glycol tank/hoses/tube lines)
Check all filters for leaks and are in proper working condition.
Check all fluid levels prior to starting machine. (Fuel, engine oil, engine
antifreeze, glycol tank)
Check battery and battery cables are secure and in good condition.
Check fuel lines and electrical cables and connections for damage and security.
Check glycol lines and fittings for leaks, cracks and overall condition.
Check engine belts and hoses for overall condition.
Check engine control panel for security.
Fuel supply and return valves in “Open” position.
