background image

1 689 989 285

2020-02-24

Robert Bosch GmbH

2.3 

Obligation of workshop operator

The workshop operator is obliged to ensure that all 
measures geared towards the prevention of accidents, 
industrial diseases, labor-related health risks are taken 
and measures towards making the workplace fit for 
people to work in are carried out. 

Electrical engineering in Germany is subject to 
the accident prevention regulations of the trade 
association "Electrical Plant and Equipment as under 
DGUV Vorschrift 3 (previously BGV A3)". In all other 
countries, the applicable national regulations acts or 
decrees are to be adhered to.

Basic rules

The workshop operator is bound to ensure that all 
electrical equipment and operating material is set up, 
modified and maintained by skilled electricians only 
or under the guidance and supervision of a skilled 
electrician in accordance with electrical engineering 
principles. 

Furthermore, the workshop operator must ensure 
that all electrical equipment and operating material 
is operated in keeping with electrical engineering 
principles.

If a piece of electrical equipment or operating 
material is found to be defective, i.e. it does not 
or no longer complies with electrical engineering 
principles, the workshop operator must ensure that 
the fault is rectified immediately and, in the event that 
imminent danger exists, also ensure that the electrical 
equipment or the electrical operating material is not 
used.

Tests (taking Germany as an example):

 

R

The workshop operator must ensure that all 
electrical systems and equipment are tested by 
a qualified electrician or under the guidance of a 
qualified electrician to ensure they are in proper 
working order:

 

$

Before starting for the first time. 

 

$

After modification or repair before starting for 
the first time. 

 

$

At given intervals. Set intervals such as to 
ensure that faults that can be expected to occur 
are determined in good time.

 

R

The test is to take the electrical engineering 
principles relating hereto into account.

 

R

Upon request of the trade association, a test 
manual is to be maintained into which specific 
entries are made. 

6  |  ET750  |  Important notes

en

Summary of Contents for Mentor Touch ET750

























Reviews: