MAC TOOLS Mentor Touch ET750, Operating Instructions Manual

Page: 11 / 24

1 689 989 285 2020-02-24
|
Robert Bosch GmbH
459966-03_Re
1 2 3
1
Fig. 3: Underside of ET750
1 Screws for battery cover
2 Battery cover
3 Stand
4.4.2 Functions of On/Off button with LED
ET750 Power supply
unit
LED
Status
Off Not connected Off –
Off Connected Green light
Yellow light
Flashing
red
Battery charge
≥ 80 %
Battery charge
< 80 %
Battery charge
< 10 %
Booting Connected /
not connected
Off –
On and LCD
on
Connected Off Battery being
charged
On and LCD
off
Not connected Green light Battery charge
≥ 10%
On and LCD
off
Not connected Flashing
red
Battery charge
< 10%
On, LCD off,
in energy
saving mode
Not connected Flashing
green
Battery charge
≥ 10%
On, LCD off,
in energy
saving mode
Not connected Flashing
red
Battery charge
< 10%
i
Briefly pressing the On/Off button sets the ET750 to
standby mode or ends standby mode as applicable.
i
Pressing the On/Off button for > 2 seconds
shuts down the Windows operating system and
switches off the ET750.
i
Pressing the On/Off button for > 5 seconds
switches off the ET750 without first shutting down
the operating system. This mode should only be
used if shutdown of the Windows operating system
is not possible.
4.4.3 Function key ƒ
Pressing the function key ƒ opens or closes the start
menu and task bar of WIN 10 as applicable.
i
Pressing the function key ƒ for > 2 seconds opens
or closes the virtual keypad as applicable.
4.4.4 Touch screen
The touch screen can be operated by hand or using a
pen. To implement an action, touch the appropriate
point on the touch screen with a finger or pen.
i
Touch screen calibration is described in Sec. 6.8.2.
4.5 Diagnostic device ET650
The ET650 is supplied with voltage via the power
supply unit included in the scope of delivery or via the
OBD interface in the vehicle.
4.5.1 Diagnosis terminals
459958-02_Ko
1
Fig. 4: Diagnosis terminals
1 Connection OBD diagnosis cable (DIAG)
4.5.2 Terminal strip
459958-01_Ko
1
2 3
Fig. 5: Terminal strip
1 Power supply connection
2 LED A and LED B (see chap. 3.5.3)
3 USB connection
Product description | ET750 | 11 en