Care and maintenance
SAFETY RECOMMENDATIONS
WARNING!
You must go to a specialized Service Centre or contact your Dealer
if the following are malfunctioning:
– the brake;
– the cutting means engage and disengage functions,
– switching the drive to forward or reverse gears.
ROUTINE MAINTENANCE
The table will help you maintain your machine’s safety and performance. It summarises the
main interventions to be made and the frequency applicable to each of them.
The boxes at the side are for you to mark the date or number of working hours at which the
intervention was made.
Operation
Hours Completed (Date or Time)
1. MACHINE
1.1 Cutting means positioning and sharpening check
3)
25
1.2 Replacing cutting means
3)
100
1.3 Transmission belt check
3)
25
1.4 Transmission belt replacement
2) 3)
–
1.5 Cutting means control belt check
3)
25
1.6 Replacing the cutting means control belt check
2)
3)
–
1.7
Brake regulation and check
3)
25
1.8 Drive regulation and check
3)
25
1.9 Cutting means engage and brake check
3)
25
1.10 Cutting means engage and brake check
25
1.11 General lubrication
4)
25
2. ENGINE
1)
2.1 Replacement of the engine oil
.....
2.2
Air filter cleaning and check
.....
2.3 Air filter replacement
.....
2.4
Fuel filter check
.....
2.5 Fuel filter replacement
.....
2.6 Spark plug points cleaning and check
.....
2.7 Replacement of spark plug
.....
1)
See the engine manual for the full list and frequency.
2)
At the first signs of any malfunction, contact your Dealer immediately.
3)
The operation must be carried out by your Dealer or a specialized Service Centre.
4)
General lubrication of all joints should also be carried out whenever the machine is to be
left unused for a long period.
Care and maintenance
In
mor
e
detail
...
34
TTK550LWM by TITAN
GB
IE
