Operation
Preparing the machine and fitting the exit guards (grass catcher or side discharge
chute)
NOTE
This machine lets you mow lawns in different ways, according to the fitted attach-
ments. The attachments mentioned here may be part of the original equipment or may be
purchased afterwards. Before starting work, prepare the machine based on how the lawn is
to be mowed. DO THIS WHEN THE ENGINE IS OFF.
WARNING!
Never use the machine without having fitted the exit guards!
• Preparation for grass cutting and
collection in the grass catcher
Hook on the grass catcher (1) inserting
the two connections (2) in the holes on
the two supports (3).
• Preparation for mowing and mulching
Make sure that the inside of the cutting-means
assembly is sufficiently clean and free of grass
and mud deposits that might hinder inserting the
deflector cap for mulching.
Move the cutting-means assembly to the maxi-
mum height position and insert the mulching at-
tachment (1) on the discharge opening, pushing it
down inside the collector channel until it stops.
Fasten the two elastic tie-rods (2) to the two holes
on the sides of the collector channel (3).
Then put the grass catcher on as indicated above.
• Preparation for mowing and grass side dis-
charge
Lift the safety lever(1) and the side discharge
guard (2). Fasten the side discharge chute (3) and
lower the guard (2), making sure it stays well fas-
tened to the chute protrusions (3a).
The side discharge chute is properly fitted if the
two arrows are aligned (4).
Then put the grass catcher on as indicated above.
In
mor
e
detail
...
26
TTK550LWM by TITAN
GB
IE
