Operation
SAFETY RECOMMENDATIONS
WARNING!
This machine must not be used on slopes steeper than 10° (17%)
(
Using on Slopes).
IMPORTANT
All the references relating to the positions of controls are described from
page 20 to page 23.
WHY THE SAFETY DEVICES CUT IN
The safety devices work in two ways:
– they prevent the engine from starting if all the safety requirements have not been met;
– by stopping the engine if even just one of the safety requirements is lacking.
a
) To start the engine, it is necessary that:
– the transmission is in “neutral”;
– all the cutting means are correctly in place;
– the operator is seated.
b
) The engine stops when:
– the operator leaves his seat;
– the grass catcher is lifted when the cutting means are engaged;
– the cutting means is engaged without the grass catcher in place;
– the parking brake is engaged without disengaging the cutting means
(
page 20, n. 2 - 3).
– the drive pedal is activated with the parking brake on (
page 20, n. 22 - 2).
DIRECTIONS BEFORE STARTING
Before starting to mow, it is necessary to carry out several checks and operations to ensure
you can work efficiently and in maximum safety.
Seat adjustment
To change the seat position, loosen the four fix
-
ing bolts (1) and slide it along the slots.
Once you have found the right position, tighten
the four screws (1) thoroughly.
In
mor
e
detail
...
24
TTK550LWM by TITAN
GB
IE
