background image

12

13

MLMP450HP40 By MacAllister

MLMP450HP40 By MacAllister

Safety information

Getting

 Started . . .

Getting

 Started . . .

Safety information

Do not expose the product to rain or wet conditions.

Do not smoke in the work area, around the product and in the vicinity 

Hot surface, do not touch! High temperatures on the product’s surfaces 
and structural parts that could cause burns, if they are touched. The 
product can also stay hot for a longer period of time after operation!

This product produces noxious exhaust fumes. If the product is used 
improperly, these fumes can lead to poisoning, a loss of consciousness 
or death!

Noxious exhaust fumes; do not operate or start the product in indoor 
rooms!

Only refuel unleaded petrol!

Add engine oil

Switch the product off and disconnect the spark plug connector 
before assembly, cleaning, adjustments, maintenance, storage and 
transportation.

Mow across the face of slopes, never up and down.

Inspect the area where the product is to be used and remove all objects 
which can be thrown by the product.
If objects are hidden while operating stop the engine and remove the 
object.

Keep hands and feet away from sharp rotating parts – danger of injury! 
When cleaning, repairing, or inspecting, make certain the cutting device 
and all mowing parts have stopped. Disconnect the spark plug cap, and 
keep the cap away from the plug to prevent accidental starting.

Keep hands and feet away.

Cutting device continues to rotate after the product is switched off. Wait 
until all machine components have completely stopped before touching 
the product.

Pay special attention when working on the cutting device!

Objects thrown by the product could hit the user or other bystanders. 
Always ensure that other people and pets remain at a safe distance 
from the product when it is in operation. In general, children must not 
come near the area where the product is.

Release the brake bar to stop the engine and blade.

Engine manual start; recoil starter

Guaranteed sound power level value in dB

MLMP450HP40

Designation of the tool (

M

_Macallister Brand; 

LM

_Lawn mower; 

P

_Petrol 

Power; 

HP

_Hand push)

The product complies with the applicable European directives and an 
evaluation method of conformity for these directives was done.

Summary of Contents for MLMP450HP40























Reviews: