background image

26

27

MLMP450HP40 By MacAllister

MLMP450HP40 By MacAllister

In

 more 

detail

 . . .

In

 more 

detail

 . . .

In 

more

 

 detail...

Product 

functions

 27

Operation 31

Care 

and

 maintenance 

36

Trouble 

shooting

 40

Recycling 

and

 disposal 

42

Guarantee 42

EC declaration of conformity 

43

Intended use

This petrol lawnmower MLMP450HP40  is designated with a power output of 1.7

 kW. 

1.  The product is intended for mowing grass in domestic gardens only. It must not be 

used to mow unusually high, dry or wet grass, e. g. pasture grass; for shredding 
leaves or mulching.

2. 

operation and to observe all the instructions therein.

3.  This product is intended for private domestic use only, not for any commercial trade 

use. It must not be used for any purposes other than those described.

Brake bar

1.  Pull the brake bar (2) towards the handle (1) and hold it in position when starting 

the engine. Keep it squeezed during operation (Fig. 11).

2.  Release the brake bar  ( 2 )  to stop the engine.

 

1

2

Fig. 11

Recoil starter

The recoil starter handle (22) is positioned at the rear of the engine.
1.  Pull the brake bar (2) towards the handle (1).

Product functions

Summary of Contents for MLMP450HP40























Reviews: