19
24
27a
27
30
31
MLMP450HP40 By MacAllister
MLMP450HP40 By MacAllister
In
more
detail
. . .
In
more
detail
. . .
Mulching insert
For mulching work use the mulching insert
(27)
.
1.
(19)
, hold it in position and insert the mulching insert
(27)
into the rear discharge chute
(24)
(Fig.
14
). Ensure the unlock button
(27a)
snaps in place.
2. Press the unlock button
(27a)
down to release and remove the mulching insert
(27)
(Fig.
15
).
Fig.
14
Fig.
15
Cutting height adjustment
Adjust the cutting height according to the needs of your lawn. The cutting height depends
on the kind of lawn and its actual height. When mowing high grass, start with the maximum
cutting height and make a second cut with lower cutting height.
1. Pull the lever
(16)
towards the wheel
(13)
, then move it forward or backward to adjust
the cutting height (Fig.
16
).
16
13
Fig.
16
WARNING!
Ensure that the lever engages between two of the prongs!
Switch the engine off and wait that the blade had come to a complete stop
before adjusting the cutting height!
Primer
The primer
(10)
(11)
. Use the primer
(10)
when starting
the product with cold engine (Fig.
17
)
11
10
Fig.
17
General operation
1. Check the product as well as accessories for damage before each use. Do not use
the product if it is damaged or shows wear.
2.
3.
4. Always push the product on its handle. Use the self-propelling function if required.
Keep the handle dry and free from lubricant to ensure safe support.
5. Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
6. Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before
averting.
7. Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the product.
Operation
Product functions