18a
17
18b
18c
18d
18
19
MLMP450HP40 By MacAllister
MLMP450HP40 By MacAllister
Getting
Started . . .
Getting
Started . . .
Before you start
Before you start
You will need
(items not supplied)
>
Suitable personal protective equipment
>
>
Petrol and engine oil
>
Fuel collecting container
>
Oil collecting container
>
Lubrication oil/grease
(items supplied)
>
1
x Spark plug wrench
(25)
>
1
x
Briggs & Stratton (B&S)
operator’s manual
(26)
>
1
x Mulching insert
(27)
Assembly
WARNING!
The product must be fully assembled before operation! Do not
use a product that is only partly assembled or assembled with damaged parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to easily assemble the product!
Disconnect the spark plug connector (12) from the spark plug! Reconnect it
after assembly.
NOTE:
Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss.
Handle bars
1. Remove the mounting sets
(18)
from the handle supports
(17)
and keep them handy
(Fig.
1
).
Fig.
1
2. Ensure that the levers
(6a)
are released and unfold the upper
(3)
and lower handle
bar
(5)
(Fig.
2).
Fig.
2
3. Make sure the wires
(4)
run on the upper side of the handle bars
(5)
.
4. Remove the covers from the lower handle bar
(5)
.
5. Make sure the holes in the lower handle bar are aligned with those in the supports
(Fig.
3
).
Fig.
3
6. Fix the lower handle bar
(5)
with the mounting sets
(18)
to the handle supports
(17)
(Fig.
4
).
Fig.
4
3
6a
5
4
5
17
18d
18c
18b
18a
17
5
