14
02
2.1 Pass a Bolt [06] through a wheel [03] and
then through a Nylon Spacer [04] ensuring
that the Nylon Spacer locates fully within the
Wheel. Then pass the Bolt [06] through the
vacant holes at the ‘curved’ end of a Roof
Hook Bar [01] and secure with a Washer
[09] and Nut [11]. Finger tighten the Nut
initially and then, with the use of two 11mm
spanners, fully secure the bolts and nuts
whilst taking care not to over-tighten and
ensuring that the Wheel freely rotates.
2.2 Repeat step 2.1 but with the Wheel [03]
located on the opposite side of the second
Roof Hook Bar [01] to ensure that a left-
hand and a right-hand Roof Hook are
formed.
2.3 Noting the relative directions of the hooks,
position the two Roof Hook assemblies on
the ladder rung fronts at the upper end of
the ladder ensuring that both Wheels are
facing outward.
2.1 Insérez un boulon [06] dans une roulette
[03], puis dans une entretoise en nylon
[04] en vous assurant que l’entretoise en
nylon est complètement emboîtée dans la
roulette. Passez ensuite le boulon [06] à
travers le trou situé sur l’embout « courbé »
d’une barre du crochet de faîtage [01] et
fixez-le avec une rondelle [09] et un écrou
[11]. Commencez par serrer l’écrou à la
main, puis à l’aide de deux clés de 11 mm,
serrez complètement le boulon dans l’écrou
en prenant soin de ne pas trop serrer et en
s’assurant que la roulette tourne librement.
2.2 Répétez l’étape 2.1 pour la roulette [03]
située de l’autre côté sur la seconde barre
du crochet de faîtage [01] pour s’assurer
qu’un crochet de faîtage se trouve des deux
côtés.
2.3 En veillant au bon sens des crochets,
disposez les deux crochets de faîtage
assemblés sur les échelons avant situés en
haut de l’échelle en vous assurant que les
deux roues sont tournées vers l’extérieur.
06
03
04
01
09
11
[01]
x2
[03]
x2
[06]
x2
[09]
x2
[11 ]
x2
[04]
x2
EN
Assembly
and
fitting
instructions
FR
Consignes
d’assemblage
et
d’installation
Summary of Contents for 3663602910398
Page 26: ...26 ...