MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
16
16
16
16
16
3.4 Recalling a Chase
Chases can be controlled via the special chaser section right hand of the
main master fader.
"Number"-button
The upper section of the display shows program number and
step of the actually running chaser program. Via the Encoder a
new program number can be preselected as NEXT :....
"ON"-button
starts the "NEXT" chaser program.
"OFF"-button
stops the actual chase.
The brightness of this chaser effect can be mastered by the chaser master
fader.
3.5 Controlling the Speed of a Running Chase
"Speed" button within the Chaser section
switches to the "CHASER SPEED" menu.
The rate of the chaser is shown in Hertz (steps per second)
and as real step time in seconds. It can be set via the Encoder
or by the LEARN button.
CHASER SPEED No. 01
LEARN
SOUND
SWAP
FREE RUN
Sec
Hz
2.12
0.47
FADE
00%
RUN:
0.00
Sec
SOUND/MANUAL: 0.00 Sec
FADETIME
REVERSE
SINGLE
Direct input of the
chaser speed by
pushing the button
in time to the
music.
Chase runs with adjusted
speed. Without FREE
RUN or SOUND selected,
only the STEP button will
switch the chase to the
next step.
Incoming
sound triggers
the chase
Alters the function
of the display
buttons to FADE-
TIME - REVERSE -
SINGLE.
The adjusted speed, the mode and the fadetime is stored together with the
chase number.
