![background image](http://html1.mh-extra.com/html/m-system/ethercat-r3-nect1/ethercat-r3-nect1_instruction-manual_3124084004.webp)
R3-NECT1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8274 P. 4 / 18
TERMINAL CONNECTIONS
Connect the unit as in the diagram below.
■
EXTERNAL DIMENSIONS unit: mm (inch)
Positioning Guide
1
2
3
4
5
6
Terminal Cover
6-M3
SCREW
6.2 (0.24)
130 (5.12)
27.5 (1.08)
109 (4.29)
■
CONNECTION DIAGRAM
INTERNAL BUS
Configuration Connector
EtherCAT (IN)
EtherCAT (OUT)
INTERNAL POWER
1
4
RUN +
RUN –
RUN CONTACT OUTPUT
USB CONNECTOR
RJ-45 MODULAR JACK
RJ-45 MODULAR JACK
CONNECT
OR
WIRING INSTRUCTIONS
■
M3 SCREW TERMINAL (RUN contact output)
Torque: 0.5 N·m
■
SOLDERLESS TERMINAL
Refer to the drawing below for recommended ring tongue
terminal size. Spade tongue type is also applicable. Sol-
derless terminals with insulation sleeve do not fit.
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
Applicable wire size: 0.75 to 1.25 mm
2
12max
6max
3max
4min
3.2 dia.
(mm)