![background image](http://html1.mh-extra.com/html/m-system/75et/75et_instruction-manual_3123409052.webp)
27
73ET/74ET/75ET USERS MANUAL EM-7353-0003B Rev.5
Choose either ‘One Time Only’ or ‘Every Day’ under Condition option.
One Time Only:
Data is stored once at a predefined time. Specify Year-Month-Day and Hour-Min-Sec. to start
the recording and the time duration.
Every Day:
The 7xET runs recording once per day at a predefined time. Specify Hour-Min-Sec. to start the
recording and the time duration.
Touching the current selection opens a numeric keypad to enter a new setting.
3.16 NODE SETTING
Touching Node Setting button on the Setting view opens Node Setting view (Figure 3.16).
Figure 3.16: Node setting.
Touch the node number and choose ‘Enable.’ Touching Enable button calls up Modbus Module Type button on the
right side.
R1M-GH2
16-point DC/thermocouple input
R1M-J3
8-point RTD/potentiometer input
R1M-A1
32-point discrete input
R1M-A1C1
32-point discrete input, FCN type connector
R1M-D1
32-point discrete output
R1M-D1C1
32-point discrete output, FCN type connector
R1M-P4(–)
Pulse totalizing counter input; detecting pulse edges to rise
R1M-P4(+)
Pulse totalizing counter input; detecting pulse edges to sink
R1MS-GH3
8-point isolated DC/thermocouple input
RZMS-U9
12-point isolated universal input
R1M-D1
32-point discrete output, FCN type connector
R2M-2H3
8-point thermocouple input
R2M-2G3
8-point DC input
R5-NM11*
R5 series I/O modules, data allocation mode 1
R5-NM12*
R5 series I/O modules, data allocation mode 2
R3-NM1*
R3 series I/O modules
*Setting the 7xET for R5/R3 Series I/O modules is explained in Section 7.