![background image](http://html1.mh-extra.com/html/m-system/75et/75et_instruction-manual_3123409013.webp)
9
7xETBLD USERS MANUAL EM-7353-0003C
Pen setting (Analog)
Pressing [Pen setting (Analog)] button opens the window shown in Figure 5.
Set channels to which ‘Analog’ is selected in ‘Pen setting (Common)’ window.
Figure 5: Pen setting (Analog).
Analog type:
Choose an analog input type for each pen. In order to change setting, press [Chg] button
and choose a new type from the list shown in ‘Type select’ window as in Figure 6.
Figure 6: Type select.
Input range:
Specify within the actual upper and lower ranges referred to as 0% and 100% respectively.
This range is the maximum range plotted on the screen. For a thermocouple/RTD input,
this setting is unavailable.
Engineering range:
Specify the scaled range in actual engineering unit. The engineering range is shown on
the digital meter when actual recording is running. For a thermocouple/RTD input, this
setting is unavailable.
Plot range:
Values in engineering unit for the plot range displayed on the chart. These values are
usually the same as Engineering Range values. Set a narrower range when you want to
enlarge a particular section of the Engineering Range.