4
7xETBLD USERS MANUAL EM-7353-0003C
2
STARTING & USING THE 7xETBLD
2.1
CONNECTING THE 7xET
Confirm that the PC on which the 7xETBLD is used is connected to the 7xET via Ethernet. The 7xET’s IP address
must be properly set in advance. Please refer to the 7xET users manual for detailed information about IP address
setting.
The 7xETBLD Ver. 3.00x is applicable to the following versions of the 7xET Series.
73ET: Ver. 6.00x
74ET: Ver. 3.00x
75ET: Ver. 3.00x
2.2
INSTALLING / UNINSTALLING THE 7xETBLD
If you already have the 7xETBLD program installed in your PC, remove it following the procedure explained in 2.2.2
before installing a new one.
2.2.1 INSTALL
1. Insert the Paperless Recorder Software Package CD (model: CHARTLSP2) into the CD-ROM drive on your PC.
The 7xETBLD Install Program automatically starts up. If the program does not start up automatically, open
Control Panel and choose Add/Remove Programs.
2. Locate the setup program under the 7xETBLD folder in the CD
3. Start Setup.exe. and follow instructions on the screen.
4. With the installation complete, ‘7xETBLD’ menu is created in ‘Programs’ menu.
2.2.2 UNINSTALL
1. Press Start on the task bar and choose Control Panel from Settings menu. (Double-click My Computer icon on
the desktop and choose Control Panel.)
2. Double-click Add/Remove Programs and follow instructions on the screen.