background image

 

MB-RAD 

Seite 20 

10.

 

Safety 

RAD tools are developed for tightening and loosening threaded fasteners using very high 

forces. For your safety and that of others, warning labels and attention labels are 

prominently attached to the torque wrench and its accessories. 

 

 

NOTE:

 Make sure you observe the directions on the warning labels at all times. 

 

 

 

RAD tools have been designed with safety in mind however, as with all tools you must 

observe all general workshop safety practices, and specifically the following: 

 

Before using your new tool, get familiar with all its accessories and how they work 

 

Always wear safety goggles when the tool is in operation 

 

Make sure the reaction arm is in contact with a solid contact point before you 

operate the tool 

 

Keep your body parts clear of the reaction arm and the contact point 

 

Make sure the reaction arm retaining ring is securely in place to hold the reaction 

arm or blank in place. 

 

RAD tools are safe and reliable. Not following precautions and instructions outlined here 

can result in injury to you and your fellow workers. RAD Torque Systems B.V. is not 

responsible for any such injury. 

 

 

11.

 

Warranty 

11.1.

 

New tool warranty 

Any new tool branded with the RAD name and purchased from RAD Torque Systems B.V., or 
through one of its authorized distributors or agents, is warranted to the original purchaser 
against defects in materials and workmanship for a period of twelve (12) month from the date of 
delivery to the end user. This guarantee is valid until fifteen (15) months after the original 
calibration date. 
 
Furthermore, the warranty conditions determine that no warranty applies if: 
1.  The defect, wholly or partly, is due to unusual, inappropriate, improper or careless use of the 
  product; 
2.  The defect, wholly or partly, is due to normal wear and tear or lack of proper maintenance; 
3.  The defect, wholly or partly, is due to installation, assembly, modification and / or repair by the 
  customer or by third parties; 
4.  The product is altered, modified, used or processed; 
5.  The product is transferred to a third party; 
6.  RAD Torque Systems B.V. has obtained the product, wholly or partly, from a third party, and 
  RAD Torque Systems B.V. can not claim compensation under warranty; 
7.  RAD Torque Systems B.V. in manufacturing of the product raw materials, and suchlike has 
  used those on the instructions of the customer; 
8. 

The product has a small deviation in it’s quality, finishing, size, composition and suchlike,

 

  which is not unusual in the industry or if the defect was technically unavoidable; 
9.  The customer has not fulfilled all obligations under the agreement promptly and correctly 
  towards RAD Torque Systems B.V.. 
 
 

Summary of Contents for MB-RAD






















Reviews: