background image

 

MB-RAD 

Seite 11 

5.15.

 

Language 

 

 

 

 

 

 

 

 

Five different languages can be selected in advanced settings: 

·

 German 

·

 English 

·

 Spanish 

·

 French 

·

 Dutch 

 

The torque wrench restarts after confirming the language. 

 

5.16.

 

Check program / Bolt verification 

 

The ‘Check’ program is

 NOT an standard feature on the MB-RAD, but can optionally 

be equipped or retrofitted with it. 

 

It has been designed for checking already tightened bolts. 

 

The Check program can be set via the program selection option: 

 

 

 

 

 

 

 

 

 

With the check program set, the display alternates between the word Check and the 

set torque. 

 

The Check program establishes the selected torque slowly. 

 

If the actual torque on the bolt is lower than the check torque, the torque wrench 

tightens the bolt to the set torque. 

 

After completing the operation, the Angle of this movement is displayed. If limits 

have been activated in advanced settings, the torque wrench evaluates the 

“controlled Angle”.

 

 

 

If the controlled angle is outside of the set limits,  

the display turns red. The abbreviation  

‘Upp. Lim.’ or ‘Low. Lim.’ appears.

 

 

The error can be acknowledged by pressing any button. 

 

If the controlled angle is within the set limits, the display 

turns green and the controlled angle is displayed. 

 

 

The torque wrench rotates slower in the Check program than in 

the normal program. 

 

Due to the elasticity of the reaction arm, a controlled angle of approx. 

1 - 3° is displayed even for non-moving bolted joints. This must be determined at the 

beginning of the test and taken into account in the evaluation. 

 

 

 

Summary of Contents for MB-RAD






















Reviews: