MB-RAD
Seite 16
6.5.
Saving and printing the data
•
To print to a printer, select ‘Print’ on the ‘Menu’ tab.
•
To save as a PDF, select a PDF printer in the print menu.
•
To save as a .csv or .xlsx file, select ‘Export’ on the ‘Menu’ tab, followed by
the
corresponding file ending.
6.6.
Synchronizing the time
•
Activate the data connection on your torque wrench.
To do this, go to
→
Extended
→
Data logging
→
Settings
→
Data transfer in the
torque wrench
’
s menu.
•
Select ‘Set RTC’ on the ‘File’ tab.
7.
Battery
Warning!
Before initial use, check that the voltage and frequency stated on the charger’s
rating plate match the figures for your own electrical supply.
Warning!
Unplug charger immediately if the cable or charger is damaged. Unplug
immediately if any sign of smoke or flames.
Warning!
To reduce risk of injury, charge only rechargeable RAD batteries, other types of
batteries may burst causing personal injury and damage.
Warning!
Do not submit the casing to impact or drill into the casing. Do not throw battery
packs or charger in fire or immerse in water. Keep battery packs dry. Do not use
any damaged or deformed battery packs.
Warning!
RAD chargers should only be operated between 0-49 degrees Celsius. Keep away
from moisture.
Warning!
Slightly acidic, flammable fluid may leak from defective Li-ion battery packs. If
battery fluid leaks out and comes into contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks and comes into contact with your eyes,
wash them with clean water and seek medical treatment immediately.
Lithium-ion battery chargers are to be used exclusively for charging RAD 18V Lithium-ion battery
packs with the maximum capacity of 5.2 Ah or 8.0 Ah.
Note:
To prevent the battery from draining, always remove battery from tool before storage.
7.1.
Battery pack faults
Warning indicator stays on
The battery pack is not being charged. The temperature is too high or too low. If the temperature
of the battery pack is between 0 - 49 degrees Celsius, the charging process begins automatically.
Warning indicator flashes on
The battery pack is defective, remove from charger immediately.
The battery fails to charge, contacts may be dirty. Remove the battery pack, clean the contacts
and replace the charger.
