68
Faders
To edit a Fader’s controls when in Preset Edit Mode, move a Fader. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel:
The Fader will send its messages over this channel. Select the global channel
(
Global
), a specific channel (
Channel 1
–
16
), a zone (
Zone
1
–
4
), or all channels (
Omni
).
Available Values:
Global, 1-16, Zone 1-4, Omni
CC:
The fader will send its MIDI messages using this CC number.
Available Values:
0-127
Minimum Value:
The fader’s minimum position will correspond with this value. You can
reverse the fader’s polarity by making this value larger than the
Maximum
value.
Available Values:
0-127
Maximum Value:
The fader’s maximum position will correspond with this value. You can
reverse the fader’s polarity by making this value smaller than the
Minimum
value.
Available Values:
0-127
Knobs
To edit one of the Knobs when in Preset Edit Mode, move a Knob. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel:
The knob will send its messages over this channel. Select the global channel
(
Global
), a specific channel (
Channel 1
–
16
), a zone (
Zone
1
–
4
), or all channels (
Omni
).
Available Values:
Global, 1-16, Zone 1-4, Omni
CC:
The knob will send its MIDI messages using this CC number.
Available Values:
0-127
Minimum Value:
The knob’s minimum position will correspond with this value. You can
reverse the knob’s polarity by making this value larger than the
Maximum
value.
Available Values:
0-127
Maximum Value:
The knob’s maximum position will correspond with this value. You can
reverse the knob’s polarity by making this value smaller than the
Minimum
value.
Available Values:
0-127
