58
When set to Program Cycle, these are the available parameters:
Values:
The Clip button will cycle through this many Program values (one at a time) when you press
it:
2 Values
,
3 Values
, or
4 Values
.
Available Values:
•
2 Values
•
3 Values
•
4 Values
First:
The Clip button will send this Program message first when you press it.
Available Values:
0-127
Second:
The Clip button will send this Program message second when you press it.
Available Values:
0-127
Third:
The Clip button will send this Program message third when you press it.
Available Values:
0-127
Last:
The Clip button will send this Program message last when you press it.
Available Values:
0-127
When set to Program IN/DC (PG IN/DC), these are the available parameters:
Type:
The Clip button will send the next (
Increment
) or previous (
Decrement
) value number in the
range of values when you press it.
Min:
The lowest Program value in the range of values will correspond with this setting.
Available Values:
0-127
Max:
The highest Program value in the range of values will correspond with this setting.
Available Values:
0-127
When set to Note, these are the available parameters:
Note:
The Clip button will send its MIDI messages using this Note number.
Available Values:
C-2 – G8
Latch:
When set to Latch On, the pad will send one value when pressed and a different value when
pressed a second time, alternating between the two values with each press. When set to Latch Off,
the pads will send one value when pressed and one value when released.
Available Values:
On/Off
Note On:
When Latch is active, the pad will send the MIDI note number with this velocity when you
press it to turn it on.
Available Values:
0-127
Note Off:
When Latch is active, the pad will send the MIDI note number with this velocity when you
press it to turn it off.
Available Values:
0-127
