104
To set a Split for the arp,
click the
Encoder
in
Split
, and select On. With Split active/on, the
Arp can be assigned to a specific section of the keybed, like a Zone assignment.
Select First,
to
set
the
lowest key that will correspond to the arp range.
Select Last,
to set the highest key that will correspond to the arp range.
Note:
When the First or Last Note is selected in Arp Edit mode you can press a key on the
keybed to enter the First or Last note. The enables you to make a quick selection and avoid
using the Encoder to make a selection.
Select Channel,
to set what channel the ARP split will send on.
Smart Chord Button
When this button is pressed, it will activate the keyboard’s internal Smart Chord functionality.
The Smart Chord functionality can function on notes being played on the keyboard or pads, or
both depending on the selection in the
GLOBAL SETTINGS
menu. When Smart Chord mode
is active a single key press will play a chord as selected in the current Smart Chord Edit
options. This functionality is available in the 2 keyboard modes, DAW, PRESET.
To edit the Smart Chord
settings
,
press
SHIFT
and the
CHORD
button.
Mode:
•
Smart
mode lets you select the key of the song (ex. C Major). When a key is pressed on
the physical keyboard, a chord will play in that key.
•
Custom
mode lets you input a custom chord. Once a chord has been input, press a key
on the physical keyboard to play a chord. To create a Custom chord, press the
Encoder
into the
Custom
field, then either use the
Encoder
to select the desired note, or press a
key for the notes you would like to enter. There are 6 available
Notes
in Custom chord
mode.
o
Note 1:
The first note in the custom Chord.
o
Note 2:
The second note in the custom Chord.
o
Note 3:
The third note in the custom Chord.
o
Note 4:
The fourth note in the custom Chord.
o
Note 5:
The fifth note in the custom Chord.
o
Note 6:
The sixth note in the custom Chord.
•
KEY:
Selects what key Smart Chord is in.
•
Type:
Selects what scale the chord will use, Major or Minor.
•
Voicing:
This lets you choose what fingerings are active in Smart Chord mode.
You can also edit parameters quickly using the keyboard’s keys, while pressing and holding
the
SHIFT
button.
To set a Split for Smart Chord,
click the
Encoder
in
Split
, and select On. With Split
active/on, Smart Chord can be assigned to a specific section of the keybed, like a Zone
assignment.
