77
When set to Program Cycle, these are the available parameters:
Values:
The Encoder will cycle through this many Program values (one at a time) when you
turn it:
1 Values
,
2 Values
,
3 Values
, or
4 Values
.
Available Values:
•
2 Values
•
3 Values
•
4 Values
First:
The Encoder will send this Program message first when you press it.
Available Values:
0-127
Second:
The Encoder will send this Program message second when you press it.
Available Values:
0-127
Third:
The Encoder will send this Program message third when you press it.
Available Values:
0-127
Last:
The Encoder will send this Program message last when you press it.
Available Values:
0-127
When set to Program IN/DC (PG IN/DC), these are the available parameters:
Type:
The Encoder will send the next (
Increment
) or previous (
Decrement
) value number in
the range of values when you turn it.
Minimum:
The lowest Program value in the range of values will correspond with this setting.
Available Values:
0-127
Maximum:
The highest Program value in the range of values will correspond with this setting.
Available Values:
0-127
When set to CC Cycle, these are the available parameters:
CC:
The Encoder will send its MIDI messages using this CC number.
Available Values:
0-127
Values:
The Encoder will send the value with this CC number when you turn it, one at a time,
cycling through them with each notch.
Available Values:
•
2 Values
•
3 Values
•
4 Values
First:
The Encoder will send the MIDI CC number with this value when you first turn it.
Available Values:
0-127
