M-Audio DCP-300 User Manual Download Page 61 | Manualshive

Page: 61 / 62

background image

User Guide

61

DCP-300

13 Warranty

Warranty Terms

M-Audio warrants products to be free from defects in materials and workmanship, under normal use

and provided that the product is owned by the original, registered user.

Visit www.m-audio.com/warranty for terms and limitations applying to your specific product.

Warranty Registration

Immediately registering your new M-Audio product entitles you to full warranty coverage and helps

M-Audio develop and manufacture the finest quality products available. Register online at

www.m-audio.com/register to receive FREE product updates and for the chance to win M-Audio

giveaways.

Documentation Feedback

At M-Audio, we’re always looking for ways to improve our documentation. If you have comments, corrections, or
suggestions regarding our documentation, email us at [email protected]

© 2009 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and
availability are subject to change without notice. Avid, M-Audio and DCP-300 are either trademarks or registered
trademarks of Avid Technology, Inc. All other trademarks contained herein are the property of their respective
owners.

DCP-300

Tested to comply with
FCC standards

FOR HOME OR STUDIO USE

WARNING

: This product contains chemicals, including lead, known to the State of California to cause cancer,

and birth defects or other reproductive harm.

Wash hands after handling.

«
...
59
60
61
62
»

Summary of Contents for DCP-300































































Reviews:

No comments

Related manuals for DCP-300

Brand: Danfoss Pages: 6

Brand: Vega Pages: 28

Brand: Vega Pages: 20

Clavinova CLP-110

Brand: Yamaha Pages: 46

Clavinova CLP-110

Brand: Yamaha Pages: 46

Brand: Yamaha Pages: 8

Brand: Fender Pages: 20

Brand: DGH Pages: 87

Brand: DR. Z Amplification Pages: 5

Brand: Velleman Pages: 32

Brand: LAUMAS Pages: 12

Brand: Roland Pages: 32

Brand: GTR Pages: 8

Commissioner dali

Brand: Artistic License Pages: 26

Brand: VOLTCRAFT Pages: 8

Brand: Novus Pages: 52

Brand: Rockler Pages: 4

Brand: Hammerhead Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands