User Guide
54
DCP-300
Data Control Assign
Though it controls Voice Volume by default, the Data Control knob can be assigned to send control messages
for a variety of functions, including Octave, Master Tuning, MIDI Program Change, Tempo, and any of
the standard MIDI CC (Control Change) messages. A table containing all the possible Data Control knob
assignments can be found in Appendix C – Data Control Assignments and MIDI CC List.
Note that the Data Control Assignment is remembered after a power cycle.
‣
To change the assignment of the Data Control knob:
Press the Transpose Down and Tempo Down
buttons at the same time.
Turn the Data Control knob to scroll through the
possible assignments until you see the desired
assignment on the LCD.
After approximately three seconds, the keyboard
will go back into Performance Mode, with your new
Data Control knob assignment.
Please note that the default assignment for the Data
Control knob is 007-VolumC.
<
Adjusting Split and Layer Voice Volume when Data Control knob has a custom assignment:
Regardless of the Data Control knob assignment, you can always adjust the Split Voice volume or Layer
Voice volume by holding down the Split or Layer button while turning the Data Control knob.
1
2
Note:
In Step 2 you may use either
the Transpose Up/Down or Tempo
Up/Down buttons instead of the Data
Control knob to scroll through the
possible assignments.
✔
Summary of Contents for DCP-300
Page 1: ...User Guide ...
