M-Audio DCP-300 User Manual Download Page 53

Page: 53 / 62

User Guide

DCP-300

MIDI Channel

This function allows you to use the Data Control knob (or Transpose Up/Down buttons) to increase or

decrease the Main MIDI Transmit Channel. The Main MIDI Transmit Channel is the MIDI channel used for

the Main Voice.

‣

To change the Main MIDI Transmit Channel:

Press the Split and Layer buttons simultaneously

to enter MIDI Channel Edit Mode.

The display will begin flashing the current Main

MIDI Transmit Channel:

Midi Chan: 001

Use the Data Control knob or the Transpose Up or

Down buttons to change the Main MIDI Transmit

Channel.

The new Main MIDI Transmit Channel will be

selected and shown in the display. For example, if

Channel 12 is selected, the display will show:

Midi Chan: 012

If the keyboard is being played at the time of the MIDI Channel change, all new notes played will be

sent on the new MIDI Channel. All held notes will play their note off messages on the MIDI Channel on

which they were played.

While in MIDI Channel Edit Mode, pressing the Transpose up and down buttons together will reset the

Main MIDI Transmit Channel function back to its default value of Channel 1.

Function

SPLIT

LAYER

Summary of Contents for DCP-300































































Search results

Summary of Contents for DCP-300

Reviews:

Related manuals for DCP-300

Brands by name

Popular brands

M-Audio DCP-300, User Manual

Search results

Summary of Contents for DCP-300

Reviews:

Related manuals for DCP-300

Brands by name

Popular brands