User Guide
21
DCP-300
RECORD
TRACK 2
Sequencer
Controls
Simultaneously press the Record button and
the Track button of the track you wish to
record on. This will start the Metronome.
Start playing the keyboard. Recording starts
as soon as you play the first note (as does
playback of the previously recorded track).
When you are finished playing, press the
Record button again to stop recording.
2
3
4
NOTE:
When Record Wait Mode is active, you can also start
recording by pressing the Play button. In that case, the Song
Recorder will record silence until you start playing the keyboard.
✔
Note:
If you have already recorded a performance on Track 1,
and would like to record an independent performance on Track
2 (without hearing Track 1 as you record), you can make sure
the Track 1 button is not lit (pressing it if necessary), before
beginning to record on Track 2. When used this way, the song
recorder allows you to record and play back two “single track
songs” instead of one “two track song.”
✔
RECORD
Sequencer
Controls
Summary of Contents for DCP-300
Page 1: ...User Guide ...
