M/A-Com Orion Operator'S Manual Download Page 61 | Manualshive

Page: 61 / 80

background image

TRUNKED OR CONVENTIONAL MODE

OPERATION

SIREN/LIGHT OPERATION

Each siren/light key is designed to control an optional siren/light package.
Pressing a siren/light key will light the key indicator. Each siren/light key
(except RESET) can be programmed for either CANCEL or ADDITIVE
operation. If programmed for CANCEL, then all other siren/light activity is
cancelled except for the activity associated with this key. If programmed for
ADDITIVE, then a key press will add its respective siren/light activity to the
current siren/light activity. It is important to note that while the lights are
additive, only a single siren can be active at a time. The current siren will be
determined from the recently pressed key that contains a siren assignment.

Each siren/light key (except RESET) can be programmed for Toggle,
Momentary or Timed. In

Toggle

, each key press will toggle the state of the

key between ON and OFF. In

Momentary

, a key's respective feature will only

be active while the key is pressed and held. When programmed for

Timed

, the

siren/light key activity will only be active during the programmable time-out
window. The duration of the time-out window is programmable between from
.5-127.5 seconds. During the time-out window the respective key indicator
will be ON. When the timer expires, the activity will be terminated and the
indicator will turn OFF. If an additional time-out key (programmed for
ADDITIVE) is pressed during the time-out window, then the time-out window
is reset and both activities will terminate at the same time.

Digital Voice (ProVoice / Aegis / Voice Guard

®

Operation)

Voice Modes

Each system (trunked or conventional) in the radio is programmed for no
digital voice operation or one of the three-supported Digital Voice formats
(ProVoice/Aegis, or Voice Guard). Aegis or ProVoice programmed systems
have three (3) different voice modes: clear (analog), digital and private. Voice
Guard systems have two (2) voice modes: clear (analog) and private. The
voice modes are programmed on a per-group basis within each trunked system
and on a per-channel basis within each conventional system. A radio must be
equipped with the encrypt/decrypt option before it will operate in private
mode.

NOTE

Current ProVoice Conventional operation is for talk-
around mode only.

61

«
...
59
60
61
62
63
...
»

Summary of Contents for Orion

















































































Reviews:

No comments

Related manuals for Orion

LUNCHBOX LB-100

Brand: Sangean Pages: 1

Brand: X-mini Pages: 14

Brand: MAJORITY Pages: 20

VXD-720 digital

Brand: Vertex Standard Pages: 28

Brand: Radionette Pages: 152

Brand: Vertex Standard Pages: 20

Brand: kchibo Pages: 5

Brand: Pure Digital Pages: 14

Brand: Eltax Pages: 8

Brand: LENCO Pages: 9

Brand: GPX Pages: 12

Brand: Reflexion Pages: 49

Brand: Shindaiwa Pages: 52

ETHICON ENDO-SURGERY HARMONIC 300

Brand: Johnson & Johnson Pages: 80

RD903600 Series

Brand: RIDGID Pages: 60

Brand: Premier Pages: 16

Brand: Sangean Pages: 1

Brand: Sangean Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands