46
To resolve false activation, refer to TSM Vol. 25, #2 problem/solution
below:
Problem:
Siren/Light functions change or turn off when switching
between radios in Dual Radio installations with a SS2000 siren
box.
Solution:
Keyboard maps and Siren/Light configuration must be identical
in both radio personalities to prevent this.
Additionally, in a Remote Mount Installation, there are three jumpers that
must be reconfigured in the Orion Remote control Unit for Siren/Light
operation. These jumpers are located on the Remote Interface Adapter (RIA),
a PC board in the back half of the unit. To access these jumpers, the RIA
must be removed from the control unit, as follows:
1. Disassemble the Orion control unit using steps given in LBI-38909, page
4, “Disassembly Procedures”.
2. Flex circuit PC2 does not need to be disengaged from J2, providing care
is taken to avoid excessive bending.
3. Reconfigure jumper “AB” from center to “B”, jumper “CD” from center
to “D”, and jumper “EF” from center to “F”.
4. Carefully reassemble RIA to the front control panel making sure that
there is adequate alignment and lubricant for the black O-ring gasket at
the mechanical interface between the RIA and the control panel. This
maintains the moisture seal of the control panel. Refer to LBI-38909,
figure 1B.
Summary of Contents for Orion
