24
6.2.2 Harley-Davidson
Installation
1.
Unpack the weather resistant motorcycle case, remove the key taped to
the top cover and open the case.
2.
Refer to Figure 6-1 and Figure 6-2 and verify all components shown in
the diagrams are available.
3.
Mount the adapter bracket to the existing Dyna or Road King (interface)
bracket on the motorcycle (user supplied) using the 1/4-20 x 5/8 screws
provided.
NOTE
The interface radio mounting bracket (user supplied) for the
Dyna and Road King models are different and require a
different mounting hole configuration. See Figure 6-1 and
Figure 6-2.
4.
Insert the power, control, and antenna cables through the square hole in
the case/antenna mounting bracket and then through the bottom case
assembly.
5.
Mount the case mounting bracket and bottom case assembly onto the 4
resilient mounts using the serrated flange nuts and flat washers included
inside the case. Refer to Figure 6-3.
6.
Refer to Figure 6-4 and connect the power cable to the radio. (Refer to
Cable Connections.)
7.
Position the radio, fins up, inside the bracket in the bottom case assembly
and slide onto the arms. Lock in place using the TORX head screws and
lock washers (taped to the radio bracket).
8.
Refer to Figure 6-4 and connect the antenna and control cables to the
radio. (Refer to Antenna Installation.)
9.
Mount the antenna to the case/antenna mounting bracket using the M3 x
16 mm pan head screws provided. Refer to Figure 6-3.
6.3
RADIO MOUNTING BRACKETS
Radio mounting brackets are not available from M/A-COM for all models of
bikes. Should a special application arise for a custom-made radio mounting
bracket, it must be made using 0.125" steel (minimum). When designing and
mounting the bracket, corners/edges should be rounded to the maximum
extent possible.
Summary of Contents for M7100IP
