M/A-Com M7100IP, Installation Manual

Page: 8 / 60

8
2.2.1 Mobile Antennas – Motorcycle Installation
NOTE
This device must not be co-located or operating in conjunction
with any other antenna or transmitter.
Install the radio’s antenna (refer to Table 2-1 for frequencies and
corresponding part numbers of recommended antennas) on the end of the
motorcycle case farthest away from the driver. These mobile antenna
installation guidelines are limited to motorcycles fit with the motorcycle radio
case with integral antenna grounding plane. The antenna installation should
additionally be in accordance with the following.
•
The requirements of the antenna manufacturer/supplier included with the
antenna.
•
Instructions in the M7100
IP
Radio and Control Unit Motorcycle
Installation Manual, including minimum antenna cable lengths.
•
The installation manual providing specific information of how to install
the antennas to facilitate recommended operating distances to all
potentially exposed persons.
Use only the M/A-COM approved/supplied antenna(s) or approved
replacement antenna(s). Unauthorized antennas, modifications, or
attachments could damage the radio and may violate FCC regulations.
2.2.2 Approved Accessories
This radio has been tested and meets the FCC RF guidelines when used with
the M/A-COM accessories supplied or designated for use with this product.
Use of other accessories may not ensure compliance with the FCC’s RF
exposure guidelines, and may violate FCC regulations.
For a list of M/A-COM approved accessories refer to the product manuals,
M/A-COM’s Products and Services Catalog, or contact M/A-COM at 1-800-
528-7711.
2.2.3 Contact Information
For additional information on exposure requirements or other information,
contact M/A-COM, Inc. at 1-800-528-7711 or at
http://www.macom-
wireless.com .