M/A-Com M7100IP, Installation Manual

Page: 21 / 60

21
6 INSTALLATION
Installation of the M7100
IP
mobile radio and control unit consists of:
•
Assembling and installing the weather resistant motorcycle case
assembly, including the adapter bracket, case/antenna mounting bracket,
and bottom case (previously assembled) to the existing interface bracket
(user supplied) on the motorcycle.
•
Installing the radio in the radio mounting bracket located inside the
weather-resistant case.
•
Installing the control unit, microphone, and speaker.
•
Installing the antenna.
•
Routing the power, control, and option cables.
•
Connecting all cables, including power, control, and option cables.
•
Installing the Headset Option.
•
Performing an operational check
All mounting hardware consists of stainless steel screws, locknuts, nuts, and
lockwashers to resist corrosion.
6.1 TOOLS REQUIRED
•
Socket wrench set U.S./metric with 3" extender
•
Open end wrench, adjustable
•
Wire clippers
•
TORX
®
BIT set, small metric
6.2 EQUIPMENT INSTALLATION
6.2.1 Weather Resistant Case Assembly and
Installation
The motorcycle Weather Resistant Case Assembly may be installed on almost
any motorcycle. Installation instructions provided here include information
for the Harley-Davidson
®
Dyna
®
and Road King
®
models. Figure 6-1 and
Figure 6-2 illustrate installation on Harley-Davidson motorcycles. Refer to
these diagrams during installation. Installation on other motorcycles is at the
discretion of the installer.