C MX 5710 Reference Manual. Rev 1.0
Page 23 of 36
Silence Detection
A yellow warning indication will be displayed if the signal
content is detected as silent (<60dB) for more than 10
sec)
Test Tone
A 1 kHz Test Tone can be generated and applied to
both mono channels at the same time. If enabled, the
AES input stream is ignored and NOT delivered at the
output.
NOTE:
All AES processing is automatically disabled (neutralized) when the
content type is NOT PCM audio. This guarantees that an encoded
bitstream (such as DolbyE or AC-3) is not disturbed by such processing.
Audio Crossbars
After going through the audio processing stage, each internal audio stream is
delivered to the output audio crossbar. Here, each of the possible audio
destinations (embedder and external outputs) can select from all of the available
signals.
The APPolo Control software offers two different types of audio cross bar
controls. The type of control can be determined in the “view” menu of the APPolo
Control software.
Figure 15: AES processing
