LYNXTechnik C MX 5710 Reference Manual Download Page 36 | Manualshive

Page: 36 / 36

background image

C MX 5710 Reference Manual. Rev 1.0

Page 36 of 36

Service

Parts List

Due to the very dense design and high level of integration there the module is not
user serviceable. Please contact LYNX for repairs or to request an exchange
unit. There is one consumable part used on this module which is the cooling fan.
A service kit is available to exchange the fan. Ordering information below.

Technical Support

If you are experiencing problems, or have questions please contact your local
distributor for further assistance.

Technical support is also available from our website:

http://support.lynx-technik.com/support/home

Please do not return products to LYNX without an RMA. Please contact your
authorized dealer or reseller for more details.

More detailed product information and product updates may be available on our
web site:

www.lynx-technik.com

Contact Information

Please contact your local distributor; this is your local and fastest method for
obtaining support and sales information.

LYNX Technik can be contacted directly using the information below.

Address

LYNX Technik AG
Brunnenweg 3
D-64331 Weiterstadt
Germany

Website

www.lynx-technik.com

E-Mail

[email protected]

LYNX Technik manufactures a complete range of high quality modular products
for broadcast and Professional markets, please contact your local representative
or visit our web site for more product information.

LYNX

Technik

AG

Broadcast Television Equipment

«
...
34
35
36

Summary of Contents for C MX 5710





































Reviews:

No comments

Related manuals for C MX 5710

Brand: Panasonic Pages: 12

Brand: 3onedata Pages: 3

Brand: Unipower Pages: 19

Brand: MAER IDROPULITRICI Pages: 13

Brand: M-Audio Pages: 45

Standard Extreme RAKK dac Mark III

Brand: Raleigh Audio Pages: 65

Brand: EINHELL Pages: 10

Brand: Inorea Pages: 104

Evolute RTLA50-S

Brand: Renishaw Pages: 11

Brand: Chord Pages: 2

Brand: Allen-Bradley Pages: 42

Brand: AJA Pages: 29

Brand: Vicruns Pages: 212

Brand: VigilLink Pages: 14

Evershine TLC4000

Brand: Zeversolar Pages: 74

Brand: B.M.C. Pages: 8

Brand: Velleman Pages: 11

Brand: Olktek Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands