Lynx RaveTM 600, Operator'S Manual

Page: 63 / 134

mmo2008-003-027_a
1. Retaining device
When seat rests in its position, firmly
push seat down to latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure
by giving it a tug to confirm proper
latching.

WARNING
Make sure seat is securely latched
before riding.
Connect 1+1 seat connector.
mmo2008-003-028_a
1. Connector
30) Rear Passenger
Heating Grip Switch
Xtrim RE-X models only
(as option)
Three-position switch. Select the de-
sired position to keep rear passenger's
hands at a comfortable temperature.
mmo2008-003-022_a
PASSENGER LH GRAB HANDLE
1. Switch
2. LH grab handle
31) Rear Grab Handles
Xtrim models only
Rear grab handles provides a grip for
the passenger.
32) Rear Rack

WARNING
All objects in rear rack must be
properly latched.
Do not carry
any breakable objects. Excessive
weight in rack may reduce steer-
ing ability.
CAUTION: Always readjust suspen-
sion according to the load. The
capacity of this rack is limited, the
MAXIMUM cargo load is 15.8 Kg
(35 lb).
Ride at very low speed
when loaded. Avoid speed over
bumps.
33) 12-Volt Power Outlet
Xtrim modesl Only
A 12-volt electric appliance may be
connected to that jack connector.
Electric current is supplied whenever
engine is running.
34) C-Type Hitch
Xtrim modesl only.
CAUTION: Refer to decal on vehicle
for towing weight capacities.
_____________________
61