Lynx RaveTM 600, Operator'S Manual

Page: 101 / 134

10-HOUR OR 500 KM INITIAL INSPECTION (1)
WEEKLY OR EVERY 250 KM (2)
MONTHLY OR EVERY 1000 KM (3)
ONCE A YEAR OR EVERY 3000 KM
(1)
EVERY 2 YEARS OR 6000 KM (1) (4)
STORAGE (1)
A: ADJUST
C: CLEAN
I:
INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
PRESEASON (1)
PART/TASK
DRIVE SYSTEM
Drive belt condition I I I
Drive belt height adjustment
EVERY BELT REPLACEMENT
DRIVE BELT
Drive and driven pulley
I I C I C
DRIVE PULLEY and DRIVEN
PULLEY
Tightening torque of drive pulley screw
I I
Driven pulley preload (12)
I I I
DRIVE PULLEY
Drive chain tension (not for models equipped
with gearbox)
A A A
Chaincase / Gearbox oil (9) I (9) I (9)
(9)
R I
CHAINCASE OR GEARBOX
Drive axle end bearing (axle without brake
disc)
(6)
L L L
Drive axle end bearing (axle with brake disc)
I
DRIVE SYSTEM
Countershaft (Fan cooled models) (6) L L L COUNTERSHAFT AND BRAKE
Track condition I I I
Track tension and alignment
A AS REQUIRED
TRACK
BRAKE SYSTEM
Brake fluid I I R I
Brake hose, pads and disk
I I I
COUNTERSHAFT AND BRAKE
_____________________
99