P TG 5610 B/D Reference Manual. Rev 1.0
Page 51 of 53
Specifications
Reference Input
Signal Type
Analog bi-level or tri-level sync – Auto Detect
Supported Formats
SMPTE 259M-C, SMPTE 292M
525/59.94Hz. 625/50Hz,
720P/59.94Hz/60Hz/50Hz/24Hz/25Hz/23.98Hz/30Hz/29.97Hz
1080i/59.94Hz/60Hz/50Hz
1080P/24Hz/25Hz/30Hz/23.98Hz/29.97Hz
1080PSF/24Hz/25Hz/23.98Hz
Sync Level
Bi Level = 300mV Nominal
Tri Level = 600mV Nominal
Input Imedance
75
Ω
Connector BNC
Reference Output
Signal Type
Analog bi-level or tri-level sync
Supported Formats
525/59.94Hz. 625/50Hz,
720P/59.94Hz/60Hz/50Hz/24Hz/25Hz/23.98Hz/30Hz/29.97Hz
1080i/59.94Hz/60Hz/50Hz
1080P/24Hz/25Hz/30Hz/23.98Hz/29.97Hz
Sync Level
Bi Level = 300mV Nominal, Tri Level = 600mV Nominal
Output Imedance
75
Ω
Connector BNC
Digital Video Ouputs (SDTV mode)
Signal
Serial Digital Video SMPTE 259M-C
Quantization 10
bits
Number of outputs
2
Output Imedance
75
Ω
Return Loss
> 15dB (270MHz)
Connection BNC
Jitter
<0.2 UI (270 Mbit/s) with 10Hz High pass filter
Digital Video Outputs (HDTV mode)
Signal
Serial Digital Video SMPTE 274M, 296M
Quantization 10
bits
Number of Outputs
2
Output Impedance
75
Ω
Return Loss
> 15dB (1.485GHz)
Connection BNC
Jitter
0.25UI (1.485Gbit/s) with 1kHz High pass filter
AES Audio Outputs
Signal
PTG 5610B =AES3id (unbalanced)
PTG 5610D = AES3 (balanced)
Impedance
PTG 5610B =75
Ω
BNC
PTG 5610D = 110
Ω
15 pin female SubD
Bit depth
20 or 24 bit (selectable for all 8 channels independently)
Number of outputs
4 AES outputs (8 channel)
Coupling Transformer
(Isolated)
Embedder
Group Selection
4 groups independently selectable ON/OFF
Function
Embed audio from test generator (4 AES channels duplicated into 4 groups)
SDI outputs
Audio embedded into both SDI outputs
Electrical
Operating Voltage
+ 5 VDC
Connector
Lemo or Binder 5 pin locking connector
Power Consumption
7 W
Safety
IEC 60950 / EN 60950 / VDE 0805
Mechanical
Size
85.5mm x 71mm x 41.5mm + connections
Weight 320g
Ambient
Temperature
5ºC – 40ºC Maintaining Specifications
Humidity
90% non condensing
