P TG 5610 B/D Reference Manual. Rev 1.0
Page 18 of 53
Connections
Video
The P TG 5610 use standard 75 Ohm BNC connectors. We recommend the use of high
quality video cable for digital video connections to reduce the risk of errors due to
excessive cable attenuation. Max cable lengths the module will support are shown below.
SDTV = 250m Belden 8281 (270Mbits/s)
HDTV = 140m Belden 1694A (1.4Gbits/s)
Note. Due to the compact design of the connection plate it will be necessary to
use a connection tool to secure the BNC video connectors.
Audio
Unbalanced AES 3id
If using the “B” suffix module then this is provided with a rear connection plate with
standard 75 Ohm BNC connections for AES audio. Connection is self explanatory.
Balanced AES3
If using the “D” Suffix module then this is provided with a rear connection plate with a 25
pin female SubD connection for balanced AES 3 audio signals. Connector wiring is
shown below.
Pin Number
Connection
Pin Number
Connection
1
n.c.
20
n.c.
2
n.c.
21
n.c.
3
n.c.
22
n.c.
4
n.c.
23
n.c.
5
n.c.
24
n.c.
6
n.c.
25
n.c.
7
AES4 +
20
AES 4 -
8
AES 4 GND
21
AES3 +
9
AES3 -
22
AES3 GND
10
AES 2 +
23
AES2 -
11
AES 2 GND
24
AES 1 +
12
AES1 -
25
AES 1 GND
13
n.c.
View looking INTO connector as seen on module
We recommend you use high quality screened (twisted pair) cable for the balanced audio
connections. LYNX has an optional audio breakout cable which will bring out all audio
connections to in line XLR connectors. Model number
R AC M25-8
