P TG 5610 B/D Reference Manual. Rev 1.0
Page 34 of 53
Typically, the window is firstly set to 100% and the display brightness adjusted so the two
vertical pluge bars are just visible on the monitor. (Setting the correct black level). A color
temperature probe is attached to the center of the Y window on the display screen
surface and the color temperature can be measured with the probe (and adjusted if
necessary using the display controls).
The Y window is then set to a low value (typically 20%) and a second reading is taken
using the probe to check display cutoff chromaticity.
Note. The P TG 5610 is only providing the pattern which is commonly used with color
temperature probes. Please refer to your probe and display documentation for the correct
color temperature measurement and adjustment procedures.
