P TG 5610 B/D Reference Manual. Rev 1.0
Page 39 of 53
SDI 1 and SDI 2 Tab
There are two identical tabs for SDI output 1 and SDI output 2. This is where the pattern
selection and character generator configuration is made.
Output Status and CF Status
– This indicates the status of the Compact Flash
card (this is an Option PTG FLASH which is installed in this example). Refer to the PTG
Flash manual for specific details on Compact Flash support.
The selected pattern description and the selected SDI standard are also shown for
reference.
Pattern Select
– All internal patterns available are shown in this scroll box, thumbnails
and pattern descriptions are provided. Clicking on an entry in the table will change the
output to the selected pattern. (Any CF images are indexed at the top of the display – not
thumbnails are possible all are represented with the “compact flash image” thumbnail
icon.
The columns of “tick” marks indicate if a pattern is available (or applicable) to a given
output format grouping. This is primarily applicable to Compact Flash images, as P TG
5610 requires test patterns in 4 basic native resolutions, and the user may only load a
pattern in a single resolution. There are some basic pattern in P TG 5610 which are not
applicable for certain applications, for instance a field test pattern is not applicable for
progressive output formats so this is disabled in the list – see below.
