P TG 5610 B/D Reference Manual. Rev 1.0
Page 48 of 53
Common GUI Controls
If using the P TG 5610 as part of a larger integrated system then there are a number of
GUI controls and commands which are common for all modules in the control system.
These are explained below.
Right click on any module in the tree will bring up a sub-menu of available commands
(see below).
Note.
This menu can also be selected using the GUI drop down menus by
clicking on
“Device”
Properties
This will bring up a dialog which shows device specific properties about the module
selected.
(Note. this is just an example and the module type and data shown is not
indicative of the module specified in this manual)
Locate
This feature is useful if you need to physically locate a module in a larger system quickly
(for removal or maintenance purposes) When Locate selected this will flash the module
alarm LED yellow. This function does not impact normal module operation and will
timeout after a short time period.
This feature can also be invoked from the main GUI screen using the “locate“ button in
the top right hand side of the screen (see below)
