Page 33
3.7.6
Knob Settings
This menu allows you to select which outputs can be adjusted with the Hilo
rotary encoder. By default, the Monitor Out and the Phones Out can be
attenuated with the rotary encoder, and pressing in the knob will toggle
between those two choices. If additional choices are selected from the Knob
Settings menu, then pressing in the Rotary Encoder will toggle through all
the Outputs that have been selected.
•
Monitor Out and Phones Out can be de-selected by clicking in the
adjoining checkboxes, and/or additional outputs can be selected with
their adjoining check boxes.
•
Up to three sources can be selected at one time.
•
After the desired sources have been selected, turning the rotary encoder
from any Hilo screen other than the Outputs Mix Routing page will
change volume for the selected output and a level meter will show
onscreen.
•
Pressing in the Rotary Encoder Knob will toggle through the available
choices.
3.7.7
Language
As of firmware revision 7, Hilo is now multi-lingual! From this button
you can select between English, Spanish, German, French and Chinese
(available in Hilo’s purchased through the Lynx Chinese distributor only).
All of the Hilo menus and parameters will now be in the language of your
choice. Please note that the onscreen keyboard from writing Scene Names
will still be in English. Also, restoring defaults and updating the firmware
will restore the unit to English, and the language of choice will need to be
re-selected.
3.7.8
Standard Menu
Some Hilo users prefer a simpler interface with only the essential controls being available. The Standard Menu button toggles between
Standard Mode (simplified interface) and Advanced Mode (complete interface). The default is Advanced Mode. When Standard Menu
is selected, the Hilo interface is reduced to 6 buttons and the METER selection icon.
As soon as Standard Menu is selected, the Hilo does a Restore Defaults to return all routing and volume controls to the default setting.
This may result in the audio from a previously muted or attenuated source to come through the Hilo at full volume.
•
The Backlight button allows control of the Hilo touchscreen
appearance. See
Section 3.7.1; Backlight
.
•
The About Hilo page is a status only button. This screen
provides you with the hardware information for Hilo and the
LT-USB card, including date of manufacture, hardware and
software revision dates.
•
The Line In and Line Out Trim buttons set the calibration
level for the Hilo Line Inputs and Line Outputs. See
Section
3.45
and
3.46
for more information about Trim levels.
