Lynx Adventure 800, Operator'S Manual

Page: 18 / 75

17
ENGLISH
Operation
Attach to clothing eyelet than snap tether cord cap over post before starting engine.
1. Snap over post
2. Attach to eyelet
If emergency engine shut off is required, completely pull tether cord cap from post.
Typical
Some Liquid-Cooled Models
On these models tether cut-out switch is part of tether cut-out system. This system serves 3
functions. It shuts off engine preventing snowmobile to runaway if the operator falls off the
vehicle accidently.
Through the D.E.S.S.
TM
(Digitally Encoded Security System), it acts as a lock by preventing
unauthorized use of your snowmobile thus deterring theft.
Finally, it prevents unintentional electric starter operation in vehicles so equipped by disab-
ling the electric starter and ignition circuits in the MPEM or ECU.
DESS (Digitally Encoded Security System) Description
This system is digitally encoded to provide you and your snowmobile with the equivalent
security as a conventional lock key.
The tether cord cap provided with your snowmobile contains an electronic chip in which a