Lynx 800R E-TEC, Operator'S Manual

Page: 89 / 196

OPERATING MODES (600 ACE AND 900 ACE )
To activate Sport mode when in ECO
mode, press top end of switch twice.
To activate Standard mode when in
ECO mode, press top end of switch
once.
fmo2014-002-012_c
TYPICAL
Step 1: Press top end of switch
WARNING
When adjusting modes, be sure to
maintain situational awareness of
other snowmobiles, obstacles, or
persons .
Learning Key Modes
The learning key provides a mode of
operation whereby engine torque and
speed are limited.
NOTE: The initial learning key pro-
gramming can limit the speed
to 40 km/h (25 MPH) or 70 km/h
(43 MPH). Refer to your authorized
Lynx dealer to modify this setting.
There are 3 levels available for the
learning key mode.
Changing Learning Key Settings
To change learning key setting, carry
out the following:
1. Press the START/electronic reverse
button to wake up the electrical sys-
tem and install the NORMAL key on
the engine cut-off switch.
2. Wait for the information center to
complete its self-test and display
the key recognition message.
Analog/Digital Gauge
3. Press the SET button until LEARN is
visible in the digital screen of the in-
formation center.
Multifunction Analog/Digital Gauge
4. Press the MODE button once, then
press the SET button until LEARN
is visible in the digital center of the
gauge.
fmo2014-003-003_d
MULTIFUNCTION GAUGE
1. MODE function
2. SET function
All Models
5. Use the heated grip switch to toggle
the key setting between 1 and 3.
_______________
87