Lynx 800R E-TEC, Operator'S Manual

Page: 47 / 196

CONTROLS/INSTRUMENTS/EQUIPMENT
To ease key type recognition, the
tether cord comes in different colors.
KEY TYPE COLOR
Normal Black
Learning Green
The Lynx learning key, limits the speed
of the snowmobile and the engine
torque, therefore enabling first time
users and less experienced operators
to learn how to operate the snowmo-
bile while gaining the necessary confi-
dence and control.
NOTE: The initial learning key pro-
gramming can limit the speed
to 40 km/h (25 MPH) or 70 km/h
(43 MPH). Refer to your authorized
Lynx dealer to modify this setting.
Refer to
OPERATING MODES
subsec-
tion for details.
6) Emergency Engine
Stop (Cut-Out) Switch
The emergency engine stop switch is
located on the RH side of handlebar.
Push-pull type switch. To stop the en-
gine in an emergency, select OFF posi-
tion (down) and simultaneously apply
the brake. To restart, button must be
at the ON position (up).
mmo2016-008-202_a
OFF POSITION
mmo2016-008-201_a
ON POSITION
All operators of the snowmobile
should familiarize themselves with the
function of this device by using it sev-
eral times on first outing and whenever
stopping the engine thereafter. This
engine cut-out procedure will become
a reflex and will prepare operators for
emergency situations requiring its use.
WARNING
If the switch has been used in an
emergency caused by a suspected
malfunction, the source of the mal-
function should be determined
and corrected before restarting
engine. See an authorized Lynx
dealer for servicing.
7) Start/Electronic
Reverse Button and
Headlights Dimmer
Switch (Models
without Multifunction
Switch)
On electric start models, press to start
engine. Refer to
ENGINE STARTING
PROCEDURE
in the
BASIC PROCE-
DURES subsection.
Once engine is started, press to en-
gage the electronic reverse. Refer
to
REVERSE (RER)
in
BASIC PROCE-
DURES
section for procedure.
_______________
45