IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF SEVERE INJURY OR DEATH:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2.
Never let children operate or play with the door controls. Keep remote controls away from children.
3.
Always keep a moving door in sight and keep people and objects away until it is completely closed.
NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR.
4. NEVER GO UNDER A STOPPED, PARTIALLY OPEN DOOR.
5.
Test the Door/Opener monthly per Sections 19 and 20. The garage door MUST reverse on contact with a
1-1/2 inch high object (or a 2 x 4 board laid flat) on the floor. The door MUST also reverse when a 6” high
object is placed on the floor in line with safety sensors. If Door/Opener fails these tests, have adjustments/
repairs made immediately. Failure to make adjustments/repairs may cause severe or fatal injury.
6.
When possible, use the Emergency Disconnect only when the door is in the closed position. Be very
cautious using the Emergency Disconnect when the door is open. Weak or broken spring(s) may allow
the door to fall rapidly, causing a severe or fatal injury.
7.
KEEP THE GARAGE DOOR PROPERLY BALANCED. See the owner’s manual included with the door. An
improperly balanced door could cause a severe or fatal injury. Have a qualified service person make
repairs to the cables, spring assemblies, and other hardware.
8. SAVE THESE INSTRUCTIONS.
Door Activation:
Upon activation by either the wall station Up/Down button, transmitter or wireless keyless entry, the door
will move in the following manner:
1.
If open, the door will close. If closed, the door will open.
2.
If closing, the door will stop and reverse. Next activation (while the door is moving) will stop.
3.
If opening, the door will stop. Next activation will close.
4.
If an obstruction is contacted or the safety sensor beam is interrupted while closing, the door will
reverse and the light will flash.
5.
If an obstruction is encountered while opening, the door will stop and the light will flash. The next
activation will close the door.
6.
The Infrared Safety Sensor uses an invisible beam which, when broken by an obstruction, causes a
closing door to reverse, prevents an open door from closing and causes the light to flash.
27
